Peel & Stick Tiles FAQ

Installation, cutting, surface preparation, and maintenance for Inno Stickers peel and stick backsplash tiles.

Do you have to grout these tiles? ▼

No! Inno Stickers peel and stick tiles don't need grout — just peel and stick.

What tool best cuts these tiles? ▼

Straight cuts: utility knife, score and snap. Holes/cutouts: jigsaw or rotary tool.

What surfaces can they be installed on? ▼

Any clean, smooth, leveled, primed surface. Can go over existing tile if surface meets criteria.

Can I install over an existing backsplash? ▼

Yes, if the existing surface is clean and leveled.

Are these easy to remove? ▼

The adhesive is very strong. Use a hair dryer to heat and gently pry with a wallpaper scraper.

What is the maximum temperature? ▼

Up to 88°C (190°F). Never expose to direct flame.

Can they be used on shower walls? ▼

Yes, on shower walls. Surface must be clean and smooth.

How do I calculate how many tiles I need? ▼

Measure width x height for square footage. Add 10% for waste. Check product page for coverage.

How do I prepare my wall surface? ▼

Clean with a degreaser (TSP). Do NOT use dish soap — it leaves a greasy film.

How do I install around outlets? ▼

Measure outlet, transfer to tile, cut with utility knife. Turn off power first.

Can I install on textured walls? ▼

No. Sand smooth and apply primer. Let primer dry 72 hours.

How do I clean my tiles? ▼

Soft sponge with warm water and mild cleaner. Avoid abrasives.

What room temperature for installation? ▼

Between 18°C (65°F) and 35°C (95°F).

How long after painting before installing? ▼

Paint: wait 21 days. Primer: wait 72 hours.

Can I install on a mirror? ▼

Yes, if clean and dry. Use glass cleaner first.

How many tiles per package? ▼

Varies by product. Check individual product page for coverage.